FUEL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FUEL PUMP

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pump with filter assembly.

    Click here


    1. A01M3CUC01
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

    2. Connect the fuel pump harness connector to the fuel pump.

    3. Engage the 5 claws of the fuel pump.

      Note


      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    4. Engage the 2 claws of the No. 1 fuel suction support.

    5. Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A01LZNG

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the connector of the fuel pump harness to the fuel suction plate sub-assembly.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here