FUEL SENDER GAUGE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A002ZSO

      Disengage the 3 clamps to disconnect the wire harness.

      Note

      Do not damage the wire harness.

    2. A0030CM

      Remove the harness protector from the wire harness.

      Note

      Do not damage the wire harness.

    3. A0030H9

      Disconnect the fuel sender gauge assembly connector.

    4. A0030A0C01
      A0030PX Push
      A003094 Pull up

      Push the claw (A) of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

      Note


      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Be careful not to bend the arm of the fuel sender gauge assembly.