FUEL PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FUEL DELIVERY PIPE (FUEL PRESSURE SENSOR)

    Click here

    Note


    • Do not remove the fuel pressure sensor from the fuel delivery pipe.

    • If the fuel pressure sensor is removed, replace the fuel delivery pipe (fuel pressure sensor) with a new one.

  2. REMOVE FUEL PIPE PLUG SUB-ASSEMBLY


    1. A01TAJY

      Secure the fuel delivery pipe in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe.

    3. Remove the dust cap sub-assembly from the fuel pipe plug sub-assembly.

    4. Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly.

    5. Remove the fuel delivery pipe from the vise.