FUEL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL PUMP


    1. A01LWSX

      Disconnect the connector of the fuel pump harness from the fuel sub-tank.

    2. A012M6C

      Disconnect the fuel pump filter hose from the fuel sub-tank.

    3. A01LYD0C02
      *a Tube
      *b Fuel Sub-tank

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and fuel pump from the fuel sub-tank.

      Note

      Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

      Click here

    4. A01M1G2

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.

    5. A01LV22C03
      *a Fuel Filter
      *b Suction Filter

      Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump from the fuel filter.

      Note


      • Do not damage the fuel filter.

      • Do not remove the suction filter from the fuel pump.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    6. A01M1C5

      Disconnect the fuel pump harness connector.

    7. A01LZH8C01
      *1 O-ring
      *2 Fuel Pump Spacer
      *a 5.0 mm (0.197 in.)

      Remove the O-ring and fuel pump spacer from the fuel pump.

      Note

      Be careful not to damage the sealing surface.

      Tech Tips

      If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm diameter) that is formed as shown in the illustration.