COMMON RAIL(w/o Glow Plug Controller) INSPECTION

PROCEDURE


  1. INSPECT COMMON RAIL ASSEMBLY


    1. A00Y7MIC03
      *a

      Component without harness connected

      (Pressure Control Valve)

      Inspect the resistance of the pressure control valve.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 3.42 to 3.78 Ω

        If the result is not as specified, replace the common rail assembly.