CAMSHAFT COMPONENTS
ILLUSTRATION
| *1 | ENGINE COVER | *2 | ENGINE OIL LEVEL DIPSTICK GUIDE |
| *3 | ENGINE WIRE | *4 | NO. 1 VACUUM PIPE |
| *5 | NO. 2 VACUUM HOSE ASSEMBLY | *6 | ENGINE OIL LEVEL DIPSTICK |
| *7 | VACUUM HOSE | *8 | O-RING |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY | *2 | AIR CLEANER CASE SUB-ASSEMBLY |
| *3 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY | *4 | VACUUM HOSE |
| *5 | VENTILATION HOSE | *6 | NO. 1 FUEL HOSE |
| *7 | NO. 2 FUEL HOSE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | COMMON RAIL ASSEMBLY | *2 | NO. 1 INJECTION PIPE SUB-ASSEMBLY |
| *3 | INJECTOR ASSEMBLY | *4 | FUEL INLET PIPE SUB-ASSEMBLY |
| *5 | NOZZLE LEAKAGE PIPE ASSEMBLY | *6 | VACUUM CONTROL VALVE BRACKET |
| *7 | SEALING RING | *8 | COPPER SEALING RING |
| *9 | CENTERING RING | *10 | CLAMPING CLAW |
| *11 | COMMON RAIL ASSEMBLY BRACKET | *12 | NO. 2 INJECTION PIPE SUB-ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CAMSHAFT POSITION SENSOR | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *3 | INTAKE MANIFOLD | *4 | OIL FILLER CAP SUB-ASSEMBLY |
| *5 | GASKET | *6 | PLUG |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | 1st: 5.0 (51, 44 in.*lbf) 2nd: 10 (102, 7) Bolt cannot be removed from the intake manifold |
*T2 | Bolt cannot be removed from the cylinder head cover sub-assembly |
| *T3 | 8.0 (82, 71 in.*lbf) Bolt cannot be removed from the intake manifold |
- | - |
ILLUSTRATION
| *1 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR | *2 | NO. 1 TURBO INSULATOR |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | INTAKE CAMSHAFT BEARING CAP | *2 | EXHAUST CAMSHAFT BEARING CAP |
| *3 | CAMSHAFT | *4 | NO. 2 CAMSHAFT |
| *5 | CAMSHAFT TIMING SPROCKET | *6 | CAMSHAFT HOUSING SUB-ASSEMBLY |
| *7 | NO. 2 TIMING CHAIN GUIDE | *8 | NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY |
| *9 | VALVE LASH ADJUSTER ASSEMBLY | *10 | NO. 2 ENGINE HANGER |
| *11 | NO. 2 CHAIN TENSIONER ASSEMBLY | *12 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | 1st: 10 (102, 7) 2nd: Loosen 90° 3rd: 14 (143, 10) |
- | - |