DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT V-RIBBED BELT


    1. A01LWMO

      Check the belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the V-ribbed belt.


      • The V-ribbed belt is cracked.

      • The V-ribbed belt is worn out to the extent that the cords are exposed.

      • The V-ribbed belt has chunks missing from the ribs.

    2. A01M16EC05
      *a Correct
      *b Incorrect

      Check that the belt fits properly in the ribbed grooves.

      Tech Tips

      Check with your hand to confirm that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.

  2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY


    1. A01LYTW

      Turn the V-ribbed belt tensioner assembly clockwise and counterclockwise and check that it turns smoothly and does not catch.

      If a malfunction exists, replace the V-ribbed belt tensioner assembly.