DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)


    1. Remove the 7 clips, 6 bolts and No. 1 engine under cover.

  3. REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)


    1. Remove the 2 clips, 9 bolts and No. 1 engine under cover.

  4. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  5. REMOVE V-RIBBED BELT


    1. A012L6GN01

      Loosen the bolts (A) and (B).

    2. Loosen the bolt (C), then remove the V-ribbed belt.

      Note

      Do not loosen the bolt (D).