ENGINE UNIT INSTALLATION

PROCEDURE

1. INSTALL NO. 1 VACUUM PUMP BRACKET

   
   

   1. Install a new gasket and the No. 1 vacuum pump bracket with the 2 bolts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. INSTALL VACUUM PUMP ASSEMBLY

   Click here

3. INSTALL IGNITION COIL ASSEMBLY

   Click here

4. INSTALL THERMOSTAT

   Click here

5. INSTALL WATER INLET

   Click here

6. INSTALL WATER INLET HOSE

   
   

   1. Install the water inlet hose with the 2 clamps.

7. INSTALL WATER BY-PASS HOSE

   
   

   1. Install the water by-pass hose with the clamp.

8. INSTALL NO. 1 WATER BY-PASS PIPE

   
   

   1. Install the No. 1 water by-pass pipe with the 2 bolts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

9. CONNECT NO. 3 WATER BY-PASS HOSE

   Click here

10. INSTALL VENTILATION HOSE

    
    

    1. Install the ventilation hose to the ventilation valve.

11. INSTALL EXHAUST MANIFOLD

    Click here

12. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

13. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

    
    

    1. Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the engine oil level dipstick guide.

    3. Install the engine oil level dipstick guide with the bolt.

       Torque:

       21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Install the engine oil level dipstick.

14. INSTALL FUEL INJECTOR ASSEMBLY

    Click here

15. INSTALL NO. 1 DELIVERY PIPE SPACER

    Click here

16. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

17. INSTALL FUEL TUBE SUB-ASSEMBLY

    Click here

18. INSTALL WIRE HARNESS CLAMP BRACKET

    Click here

19. INSTALL DUTY VACUUM SWITCHING VALVE

    Click here

20. INSTALL INTAKE MANIFOLD

    Click here

21. INSTALL THROTTLE BODY ASSEMBLY

    Click here