CYLINDER HEAD COMPONENTS
ILLUSTRATION
| *1 | INNER COMPRESSION SPRING | *2 | INTAKE VALVE |
| *3 | INTAKE VALVE GUIDE BUSH | *4 | INTAKE VALVE STEM OIL SEAL |
| *5 | EXHAUST VALVE | *6 | EXHAUST VALVE GUIDE BUSH |
| *7 | EXHAUST VALVE STEM OIL SEAL | *8 | STUD BOLT |
| *9 | SPARK PLUG TUBE | *10 | VALVE SPRING SEAT |
| *11 | NO. 1 STRAIGHT SCREW PLUG | *12 | NO. 2 STRAIGHT SCREW PLUG |
| *13 | NO. 3 STRAIGHT SCREW PLUG | *14 | RING PIN |
| *15 | CYLINDER HEAD SCREW PLUG GASKET | *16 | NO. 2 CYLINDER HEAD SCREW PLUG GASKET |
| *17 | VALVE SPRING RETAINER | *18 | VALVE SPRING RETAINER LOCK |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |