ENGINE UNIT REMOVAL

PROCEDURE


  1. REMOVE TURBOCHARGER SUB-ASSEMBLY

    Click here

  2. REMOVE FUEL INJECTOR ASSEMBLY

    Click here

  3. REMOVE FUEL PUMP ASSEMBLY

    Click here

  4. REMOVE NO. 1 IGNITION COIL

    Click here

  5. REMOVE FUEL VAPOR FEED PIPE


    1. A01LX7O

      Remove the 2 bolts and fuel vapor feed pipe from the cylinder head cover sub-assembly.

  6. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY


    1. A01LW98

      Remove the water by-pass pipe union bolt and water inlet pipe gasket.

    2. Remove the 3 bolts and water by-pass pipe sub-assembly from the cylinder head sub-assembly.

  7. REMOVE VACUUM PUMP ASSEMBLY

    Click here

  8. REMOVE NO. 1 WATER BY-PASS HOSE


    1. A01LW6B

      Slide the clip and remove the No. 1 water by-pass hose from the water inlet.

  9. REMOVE NO. 1 HEAT INSULATOR BRACKET


    1. A01M1GT

      Remove the bolt and No. 1 heat insulator bracket from the cylinder block sub-assembly.

  10. REMOVE STUD BOLT


    1. A01LVM9

      Using an E8 "TORX" socket wrench, remove the stud bolt from the timing chain cover assembly.