FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. REMOVE CRANKSHAFT PULLEY


    1. A01TB9RC01
      *a Hold
      A01TCE3 Turn

      Using SST, remove the crankshaft pulley bolt.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )

    2. Remove the crankshaft pulley from the crankshaft.

  5. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01TCKDC02
      *a Pry
      *b Cut Position
      *c Protective Tape

      Using a knife, cut off the timing chain cover oil seal lip.

    2. Using a screwdriver with its tip wrapped with tape, pry out the timing chain cover oil seal.

      Note

      After removing, check the crankshaft and timing chain cover sub-assembly for damage. If damaged, smooth the surface with 400-grit sandpaper.