CAMSHAFT(w/o Glow Plug Controller) COMPONENTS
ILLUSTRATION
| *1 | EGR WITH COOLER PIPE ASSEMBLY | *2 | VACUUM TRANSMITTING HOSE |
| *3 | GASKET | *4 | NO. 2 WATER BY-PASS HOSE |
| *5 | NO. 2 OIL COOLER HOSE | *6 | VACUUM HOSE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | EGR VALVE (ELECTRIC EGR CONTROL VALVE ASSEMBLY) | *2 | ENGINE OIL LEVEL DIPSTICK |
| *3 | ENGINE OIL LEVEL DIPSTICK GUIDE | *4 | NO. 1 EGR COOLER BRACKET |
| *5 | NO. 4 WATER BY-PASS HOSE | *6 | O-RING |
| *7 | GASKET | *8 | NO. 3 WATER BY-PASS HOSE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | INTAKE AIR CONNECTOR WITH DIESEL THROTTLE BODY | *2 | NO. 2 OIL COOLER HOSE |
| *3 | INTAKE AIR CONNECTOR GASKET | *4 | HOSE CLAMP |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | FUEL INLET PIPE SUB-ASSEMBLY | *2 | NO. 1 SUPPLY PUMP DRIVE COUPLING |
| *3 | NO. 2 FUEL HOSE | *4 | NOZZLE LEAKAGE PIPE ASSEMBLY |
| *5 | NOZZLE LEAKAGE PIPE SET CLAMP | *6 | SUPPLY PUMP ASSEMBLY |
| *7 | NO. 1 FUEL HOSE | *8 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | NO. 4 WATER BY-PASS HOSE | *2 | WATER BY-PASS PIPE SUB-ASSEMBLY |
| *3 | WATER BY-PASS HOSE | *4 | O-RING |
| *5 | OIL COOLER HOSE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ No. 1 Engine Cover | ||
| *1 | CRANKSHAFT DAMPER SUB-ASSEMBLY | *2 | ENGINE COVER BRACKET |
| *3 | GENERATOR ASSEMBLY | *4 | GENERATOR BRACKET |
| *5 | VACUUM PUMP ASSEMBLY | *6 | V-RIBBED BELT TENSIONER ASSEMBLY |
| *7 | O-RING | *8 | TIMING CHAIN COVER OIL SEAL |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Precoated part | - | - |
ILLUSTRATION
| *A | w/o Stop And Start System | - | - |
| *1 | CAMSHAFT POSITION SENSOR | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *3 | HARNESS BRACKET | *4 | NO. 2 CYLINDER HEAD COVER |
| *5 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | HARNESS BRACKET | *2 | INLET WATER HOSE LH |
| *3 | NO. 2 TIMING CHAIN COVER | *4 | TIMING CHAIN COVER SUB-ASSEMBLY |
| *5 | ENGINE MOUNTING BRACKET RH | *6 | OIL PUMP GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ Stop And Start System | - | - |
| *1 | CAMSHAFT | *2 | CHAIN SUB-ASSEMBLY |
| *3 | CHAIN TENSIONER SLIPPER | *4 | NO. 1 CHAIN TENSIONER ASSEMBLY |
| *5 | NO. 1 CHAIN VIBRATION DAMPER | *6 | NO. 2 CAMSHAFT BEARING CAP |
| *7 | NO. 1 CAMSHAFT BEARING CAP | *8 | CAMSHAFT TIMING SPROCKET |
| *9 | CRANKSHAFT TIMING SPROCKET | *10 | SENSOR PLATE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |