INTAKE AIR TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE BATTERY

    Click here

  4. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. B00422H

      Disconnect the intake air temperature sensor connector.

    2. B0043YDC01
      *a 45°

      Rotate the intake air temperature sensor 45° counterclockwise and remove it.

      Note

      If the intake air temperature sensor has been struck or dropped, replace it.