CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Connect the crankshaft position sensor connector.

   2. Using a T25 "TORX" socket wrench, install the crankshaft position sensor with the bolt.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      Note

      If the crankshaft position sensor has been struck or dropped, replace it.

2. INSTALL FRONT EXHAUST PIPE ASSEMBLY

   Click here