MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tech Tips

   Perform "Air Flow Meter Learning Value Reset" after replacing the mass air flow meter sub-assembly.

   Click here

   
   

   1. Using a T20 "TORX" socket wrench, install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      Torque:

      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

      Note

      If the mass air flow meter sub-assembly has been struck or dropped, replace it.

   2. Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

   
   

   1. Perform "Air Flow Meter Learning Value Reset" after replacing the mass air flow meter sub-assembly.

      Click here