CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE CAMSHAFT POSITION SENSOR


    1. for Exhaust Side:


      1. A01TBV5

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If the camshaft position sensor has been struck or dropped, replace it.

    2. for Intake Side:


      1. A01T960

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If the camshaft position sensor has been struck or dropped, replace it.