ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      Torque:

      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

      Tech Tips

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Click here

   3. Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. ADD ENGINE COOLANT

   Click here

5. INSPECT FOR ENGINE COOLANT LEAK

   Click here

6. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here