ENGINE COOLANT TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR


    1. A012HG9C07
      *a

      Component without harness connected

      (Engine Coolant Temperature Sensor)
      *b Resistance (kΩ)
      *c Temperature (°C)
      *d Acceptable

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
      80°C (176°F) 0.310 to 0.326 kΩ

      Note

      When checking the engine coolant temperature sensor in water, do not allow water to contact the terminals. After checking, dry the engine coolant temperature sensor.

      If the result is not as specified, replace the engine coolant temperature sensor.