IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE


  1. INSTALL SPARK PLUG


    1. Using a 14 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Install the same parts in the same combination to the original locations.

      Tech Tips

      Perform "Inspection After Repair" after replacing the spark plug.

      Click here

  2. INSTALL IGNITION COIL ASSEMBLY


    1. A01TBENC02
      *1 Ignition Coil Assembly Body
      *2 Plug Cap

      Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Install the same parts in the same combination to the original locations.

      Tech Tips

      Perform "Inspection After Repair" after replacing the ignition coil assembly.

      Click here

    2. Connect the 4 ignition coil assembly connectors.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here