CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CRANK POSITION SENSOR


    1. A00Y9ZSC07
      *1 O-ring

      Apply a light coat of engine oil to the O-ring of the sensor.

      Note

      If reusing the crankshaft position sensor, be sure to inspect the O-ring.

    2. Install the crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

    3. Connect the crank position sensor connector.

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL REAR ENGINE UNDER COVER RH