MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   
   

   1. Install the mass air flow meter sub-assembly with the 2 screws.

      Note

      
      

      • If reusing the mass air flow meter, be sure to inspect the O-ring.

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

      Tech Tips

      Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      Click here

   2. Connect the mass air flow meter sub-assembly connector.