THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. B0043VH

      Disconnect the mass air flow meter connector and disengage the 2 wire harness clamps.

    2. Disconnect the 2 clamps.

    3. Slide the clip and disconnect the ventilation hose

    4. Loosen the hose clamp and remove the air cleaner cap sub-assembly.

  4. REMOVE THROTTLE BODY ASSEMBLY


    1. B0043Y1

      Disconnect the connector.

    2. Slide the clip and disconnect the 2 water hoses.

    3. B0043O2

      Remove the 2 bolts, 2 nuts and throttle body assembly from the intake manifold. (Type A)

    4. B0044CK

      Remove the 4 bolts and throttle body assembly from the intake manifold. (Type B)

  5. REMOVE THROTTLE BODY GASKET


    1. B0044VV

      Remove the throttle body gasket from the intake manifold.