CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. for Intake Side


      1. B00432KC01
        *1 O-ring

        Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

        Note

        Do not damage the O-ring.

      2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • If a component has been dropped or subjected to a strong impact, replace it.

        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

    2. for Exhaust Side


      1. B0044WPC03
        *1 O-ring

        Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

        Note

        Do not damage the O-ring.

      2. Install the camshaft timing oil control valve assembly and wire harness bracket to the cylinder head cover sub-assembly with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • If a component has been dropped or subjected to a strong impact, replace it.

        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover).

        • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

      3. Connect the camshaft timing oil control valve assembly connector.

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here