KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK CONTROL SENSOR

   
   
   1. 

      *a

      Up

      Install the knock control sensor with the bolt.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      
      

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the knock sensor is in the correct position.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the knock sensor.

      Click here

   2. Connect the knock control sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here