ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. B004428

      Disconnect the engine coolant temperature sensor connector.

    2. B0043VJC03
      *1 Deep socket wrench

      Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.