IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 IGNITION COIL


    1. A002ZVHC01
      *a Sensor Wire Connector
      *b Fuel Pump Assembly Connector
      *c No. 1 Ignition Coil Connector
      *d Camshaft Position Sensor Connector

      Disconnect the sensor wire connector.

    2. Disconnect the fuel pump assembly connector.

    3. Disconnect the No. 1 ignition coil connector.

    4. Disconnect the camshaft position sensor connector.

    5. Disengage the 2 clamps.

    6. Remove the nut and separate the engine wire from the cylinder head cover sub-assembly.

    7. A0030A7

      Disconnect the 3 No. 1 ignition coil connectors.

    8. A0030NQ

      Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.

      Note

      If a No. 1 ignition coil has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.

  3. REMOVE SPARK PLUG


    1. A00307A

      Using a 14 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.