MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   Click here

   
   

   1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      Torque:

      1.4 N*m  { 14 kgf*cm, 12 in.*lbf }

      Note

      
      

      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the gasket.

      • Make sure that the gasket is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

   2. Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      Click here