THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 1 ENGINE COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A01T8L0

      Loosen the hose clamp and separate the air cleaner cap sub-assembly from the throttle with motor body assembly.

    2. A01TCRH

      Disconnect the mass air flow meter connector and separate the 2 wire harness clamps from the air cleaner cap sub-assembly.

    3. A01TBS2

      Slide the clip and disconnect the ventilation hose.

    4. A01TALV

      Separate the purge valve (purge VSV) from the air cleaner cap sub-assembly.

    5. A01T8TL

      Unlock the 2 clamps and remove the air cleaner cap sub-assembly.

  4. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY


    1. A01TCE6

      Disconnect the throttle with motor body assembly connector and wire harness clamp.

    2. A01TBUJ

      Slide the 2 clips and disconnect the 2 water hoses from the throttle with motor body assembly.

    3. Remove the 4 bolts to remove the throttle with motor body assembly and wire harness bracket.

  5. REMOVE THROTTLE BODY GASKET


    1. A01TAF7

      Remove the throttle body gasket from the intake manifold.