ECM(w/o Glow Plug Controller) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

   
   

   1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

2. INSTALL NO. 1 ECM BRACKET

   
   

   1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

3. INSTALL ECM

   
   

   1. Install the ECM with the 2 bolts.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

   2. Connect the 2 connectors from the ECM, and lower the 2 levers.

      Note

      
      

      • When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.

      • Make sure that the 2 levers are securely lowered.

4. INSTALL NO. 1 AIR CLEANER INLET

   
   

   1. Install the No. 1 air cleaner inlet with the bolt.

      Torque:

      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

5. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

8. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   Click here

9. PERFORM REGISTRATION

   Click here

10. PERFORM INITIALIZATION

    Click here