MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL DIESEL TURBO PRESSURE SENSOR


    1. A00Y66UC01
      *1 Protrusion

      Install the diesel turbo pressure sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

      Note


      • Make sure that the protrusion of the gas filter bracket is inserted into the hole of the sensor.

      • If a component has been dropped or subjected to a strong impact, replace it.

    2. Connect the connector to the diesel turbo pressure sensor.

    3. Connect the vacuum hose.

  2. INSTALL NO. 1 ENGINE COVER

    Click here