ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm socket wrench, install the engine coolant temperature sensor onto the cylinder head sub-assembly.

      Torque:

      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

   3. Connect the connector of the engine coolant temperature sensor.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. ADD ENGINE COOLANT

   Click here

5. INSPECT FOR COOLANT LEAK

   Click here

6. INSTALL NO. 1 ENGINE COVER

   Click here