| Pedal height from dash panel (for LHD) | 1NR-FE | 135.5 to 145.5 mm (5.33 to 5.73 in.) |
| 1ZR-FAE, 1ZR-FE, 8NR-FTS | 143.6 to 153.6 mm (5.65 to 6.05 in.) | |
| 1ND-TV, 1WW | 151.8 to 161.8 mm (5.98 to 6.37 in.) | |
| Pedal height from dash panel (for RHD) | 1NR-FE | 153.4 to 163.4 mm (6.04 to 6.43 in.) |
| 1ZR-FAE, 8NR-FTS | 162.3 to 172.3 mm (6.39 to 6.78 in.) | |
| 1ND-TV, 1WW | 171.5 to 181.5 mm (6.75to 7.15 in.) | |
| Pedal free play | - | 5.0 to 15.0 mm (0.197 to 0.591 in.) |
| Push rod play at pedal top | - | 1.0 to 5.0 mm (0.0394 to 0.197 in.) |
| Clutch release point from pedal full stroke end position | - | 25 mm (0.984 in.) or more |
| Clutch actuator (for EC65A) | Resistance | 0.1 to 100 Ω |
| Clutch disc rivet depth | Minimum | 0.3 mm (0.0118 in.) |
| Clutch disc runout | Maximum | 0.8 mm (0.0315 in.) |
| Diaphragm spring fingerwear | Maximum depth Maximum width |
0.5 mm (0.0197 in.) 6.0 mm (0.236 in.) |
| Flywheel runout (for EC60, EC69, EC65A and EA66) | Maximum | 0.1 mm (0.00394 in.) |
| Flywheel runout (for EC61) | Maximum | 0.12 mm (0.00472 in.) |
| Diaphragm spring tip non-alignment (for EC60, EC61, EC69 and EC65A) | Maximum | 0.5 mm (0.0197 in.) |
| Diaphragm spring tip non-alignment (for EA66) | Maximum | 1.3 mm (0.0512 in.) |
| Clutch pedal switch resistance | ON (pushed) OFF (free) |
Below 1 Ω 10 kΩ or higher |
| Transaxle | Brake master cylinder sub-assembly | Brake fluid |
| EC60, EC61, EC6A, EC69 and EA66 | Type A | SAE J1704 or FMVSS No. 116 DOT4 |
| EC60, EC61, EC6A, EC69 and EA66 | Type B | SAE J1703 or FMVSS No. 116 DOT3 |
Tech Tips
Refer to the illustration to confirm the type of brake master cylinder sub-assembly.
| Transaxle | Brake fluid |
| EC60, EC61, EC6A, EC69 and EA66 | SAE J1704 or FMVSS No. 116 DOT4 |
| Transaxle | Brake fluid |
| EC65A | SAE J1704 or FMVSS No. 116 DOT 4 |