| Engine switch | Standard resistance 5(SS1) - 6(AGND) (Not pushed) 1(SS2) - 6(AGND) (Not pushed) |
10 kΩ or higher |
| Standard resistance 5(SS1) - 6(AGND) (Pushed) 1(SS2) - 6(AGND) (Pushed) |
Below 1 Ω | |
| Ignition switch | Standard resistance Between all terminals (LOCK) |
10 kΩ or higher |
| Standard resistance 2(ACC) - 4(AM1) (ACC) |
Below 1 Ω | |
| Standard resistance 1(IG1) - 2(ACC) - 4(AM1) (ON) |
||
| Standard resistance 5(AM2) - 6(IG2) (ON) |
||
| Standard resistance 1(IG1) - 3(ST1) - 4(AM1) |
||
| Standard resistance 5(AM2) - 6(IG2) - 7(ST2) |
||
| Starter relay | Standard resistance 3 - 5 |
10 kΩ or higher (Battery voltage not applied) |
| Below 1 Ω (Battery voltage applied to terminals 1 and 2) |
| Starter assembly | Standard current | Below 90 A at 11.5 V |
| Starter armature assembly standard resistance | Segment - Segment | Below 1 Ω |
| Commutator - Armature coil core | 10 kΩ or higher | |
| Starter armature assembly commutator runout | Standard runout | 0.02 mm (0.000787 in.) |
| Maximum runout | 0.05 mm (0.00197 in.) | |
| Starter armature assembly commutator diameter | Standard diameter | 25.0 mm (0.984 in.) |
| Minimum diameter | 24.0 mm (0.945 in.) | |
| Starter armature assembly undercut depth | Standard depth | 0.7 mm (0.0276 in.) |
| Minimum depth | 0.2 mm (0.00787 in.) | |
| Brush length | Standard length | 11.6 mm (0.457 in.) |
| Minimum length | 7.6 mm (0.299 in.) | |
| Magnet starter switch assembly resistance | Terminal 50 - Body | Below 2Ω |