ENGINE OIL COOLER INSTALLATION

PROCEDURE


  1. INSTALL OIL COOLER ASSEMBLY


    1. A00Y76TN01

      Apply engine oil to the 2 new gaskets (B).

      Note

      Do not apply engine oil to the new gasket (A).

    2. Install 3 new gaskets to the oil cooler bracket.

    3. Install the oil cooler assembly with the 5 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL WATER BY-PASS HOSE


    1. A00YAE5C03
      *a Paint Mark
      *b Upper Side

      Install the water by-pass hose, and slide the 2 clips to secure it.

      Note

      Connect the water by-pass hose so that the painted marks of the water by-pass hose are as shown in the illustration.

  3. INSTALL INTAKE MANIFOLD

    Click here