RADIATOR REMOVAL

PROCEDURE


  1. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE THERMISTOR ASSEMBLY

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)

    Click here

  6. REMOVE BATTERY

    Click here

  7. DRAIN ENGINE COOLANT

    Click here

  8. DISCONNECT NO. 1 WATER HOSE CLAMP BRACKET


    1. A01M25F

      Remove the 2 bolts and disconnect the No. 1 water hose clamp bracket from the upper radiator support sub-assembly.

    2. Disengage the 2 clamps.

  9. DISCONNECT WATER BY-PASS HOSE


    1. A01M0UF

      Slide the clip and disconnect the water by-pass hose.

  10. DISCONNECT NO. 3 RADIATOR HOSE


    1. A01M07L

      Slide the clip and disconnect the No. 3 radiator hose.

  11. DISCONNECT NO. 2 RADIATOR HOSE


    1. A01LVPB

      Slide the clip and disconnect the No. 2 radiator hose.

  12. REMOVE HOOD LOCK ASSEMBLY

    Click here

  13. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY


    1. A01LYU4

      Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

    2. A01LV3I

      Disconnect the horn connector.

    3. A01LZWO

      Remove the 5 bolts and upper radiator support sub-assembly.

  14. DISCONNECT NO. 3 WATER BY-PASS HOSE


    1. A01LZ5K

      Disengage the clamp.

    2. Slide the clip and disconnect the No. 3 water by-pass hose.

  15. REMOVE NO. 2 FAN SHROUD


    1. A01LYQIC01
      *a Guide

      Remove the 2 bolts.

    2. Disengage the 2 claws and 2 guides and remove the No. 2 fan shroud from the radiator assembly.

    3. Remove the 2 radiator support cushions from the No. 2 fan shroud.

  16. REMOVE RADIATOR ASSEMBLY


    1. A01M35N

      Disconnect the cooling fan ECU connector.

    2. Disengage the wire harness clamp.

    3. A01M2COC01
      *a Guide

      Disengage the 2 guides and disconnect the condenser assembly from the fan shroud as shown in the illustration.

      Note

      Do not damage the condenser assembly or radiator assembly when removing the condenser assembly.

    4. A01LVR4

      Remove the radiator assembly with the fan shroud.

      Note

      Do not apply excessive force to the condenser assembly or pipe when removing the radiator assembly.

    5. Remove the 2 lower radiator supports.

    6. A01LZC7

      Remove the 2 bolts and fan shroud from the radiator assembly.

  17. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the radiator drain cock plug.

    2. Remove the O-ring from the radiator drain cock plug.