WATER PUMP INSTALLATION

PROCEDURE


  1. INSTALL ENGINE WATER PUMP ASSEMBLY


    1. A012H1JC01
      *a Protrusion

      Align the protrusion of a new gasket with the cutout in the timing chain cover sub-assembly and install the gasket in the groove of the timing chain cover sub-assembly.

      Tech Tips

      Be sure to clean the contact surfaces.

    2. A012IG4N01

      Install the engine water pump assembly with the 5 bolts.

      Torque:
      Bolt A
      25.5 N*m  { 260 kgf*cm, 19 ft.*lbf }
      Bolt B
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }
      Bolt Length
      Item Length
      Bolt A 35 mm (1.38 in.)
      Bolt B 25 mm (0.984 in.)

  2. INSTALL GENERATOR ASSEMBLY (for 90A Type)

    Click here

  3. INSTALL GENERATOR ASSEMBLY (for 100A Type)

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here