RADIATOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. DRAIN ENGINE COOLANT (for Intercooler)

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Air Conditioning System)

    for HFC-134a (R134a): Click here

    for HFO-1234yf (R1234yf): Click here

  5. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  6. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE HOOD LOCK ASSEMBLY

    Click here

  8. REMOVE NO. 3 RADIATOR AIR GUIDE

    Click here

  9. REMOVE RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY

    Click here

  10. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY (w/ Air Conditioning System)

    Click here

  11. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY (w/ Air Conditioning System)

    Click here

  12. REMOVE CONDENSER WITH RECEIVER ASSEMBLY (w/ Air Conditioning System)

    Click here

  13. DISCONNECT NO. 4 TURBO WATER HOSE

    Click here

  14. DISCONNECT NO. 3 TURBO WATER HOSE

    Click here

  15. REMOVE ELECTRIC WATER PUMP ASSEMBLY

    Click here

  16. REMOVE BATTERY


    1. Loosen the nut and disconnect the cable from the positive (+) battery terminal.

    2. A01T9YK

      Remove the bolt, nut, battery clamp bolt and battery clamp sub-assembly.

    3. Remove the battery insulator from the battery.

    4. Remove the battery.

  17. REMOVE BATTERY TRAY


    1. Remove the battery tray.

  18. REMOVE THERMISTOR ASSEMBLY

    Click here

  19. DISCONNECT NO. 2 WATER BY-PASS HOSE


    1. A01TDGA

      Slide the clip and disconnect the No. 2 water by-pass hose from the intercooler reserve tank assembly.

    2. Disengage the clamp to disconnect the No. 2 water by-pass hose from the upper radiator support sub-assembly.

  20. DISCONNECT NO. 1 WATER BY-PASS HOSE


    1. A01TA6U

      Disengage the clamp to disconnect the No. 1 water by-pass hose from the No. 2 intercooler water hose.

    2. Slide the clip and disconnect the No. 1 water by-pass hose from the intercooler reserve tank assembly.

  21. DISCONNECT NO. 2 INTERCOOLER WATER HOSE


    1. A01T9D0

      Slide the clip and disconnect the No. 2 intercooler water hose from the intercooler reserve tank assembly.

  22. DISCONNECT NO. 2 RADIATOR HOSE


    1. A01T8R6

      Slide the clip and disconnect the No. 2 radiator hose from the water inlet with thermostat sub-assembly.

  23. DISCONNECT NO. 1 RADIATOR HOSE

    A01TCRI

    1. Slide the clip and disconnect the No. 1 radiator hose from the water outlet.

  24. REMOVE UPPER RADIATOR SUPPORT


    1. A01TCJF

      Remove the 2 bolts and 2 upper radiator supports.

    2. Remove the radiator support cushion from each upper radiator support.

  25. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY


    1. A01TBFB

      for RHD:


      1. Disengage the 2 clamps to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

      2. Disengage the clamp to disconnect the wire harness from the upper radiator support sub-assembly.

    2. A01TCE1

      for LHD:


      1. Disengage the 2 clamps to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

      2. A01TAZE

        Disengage the clamp to disconnect the wire harness from the upper radiator support sub-assembly. (w/ Engine Hood Courtesy Switch)

    3. A01TA5T

      Remove the 4 bolts and upper radiator support sub-assembly.

  26. REMOVE NO. 2 FAN SHROUD


    1. A01T8H1

      Disengage the 4 clamps to disconnect the No. 2 water by-pass hose from the No. 2 fan shroud.

    2. A01TAV4

      Remove the 2 bolts.

    3. Disengage the 3 claws and remove the No. 2 fan shroud from the radiator assembly.

  27. REMOVE RADIATOR ASSEMBLY AND FAN SHROUD ASSEMBLY


    1. A01T90E

      Disconnect the cooling fan ECU connector.

    2. Disengage the 4 wire harness clamps.

    3. A01T9UR

      Remove the radiator assembly and fan shroud assembly from the vehicle body.

    4. Remove the 2 lower radiator supports.

  28. REMOVE INTERCOOLER COOLING RADIATOR ASSEMBLY

    Click here

  29. REMOVE RADIATOR ASSEMBLY


    1. A01TCV0

      Slide the clip and remove the No. 2 water by-pass hose from the radiator assembly.

    2. Disengage the 2 clamps to disconnect the No. 1 radiator hose from the fan shroud assembly.

    3. Slide the clip and remove the No. 1 radiator hose from the radiator assembly.

    4. A01T9SZ

      Slide the clip and remove the water by-pass hose from the radiator assembly.

    5. Slide the clip and remove the No. 2 radiator hose from the radiator assembly.

    6. Disengage the 2 claws and remove the radiator assembly from the fan shroud assembly.

      A01TAX1

      Note

      Do not damage the radiator assembly when removing the fan shroud assembly.

  30. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the radiator drain cock plug.

    2. Remove the O-ring from the radiator drain cock plug.