THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL THERMOSTAT

   
   

   1. Install a new gasket to the thermostat.

   2. 

      *a	Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tech Tips

      The jiggle valve may be set within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

   
   

   1. Install the water inlet with the 3 bolts.

      Torque:

      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

3. INSTALL NO. 4 WATER BY-PASS PIPE

   
   

   1. Apply soapy water to a new O-ring and install it to the No. 4 water by-pass pipe.

   2. Install the No. 4 water by-pass pipe with the bolt.

      Torque:

      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

   3. Connect the water by-pass hose and slide the clip to secure it.

4. CONNECT NO. 2 RADIATOR HOSE

   
   

   1. Connect the No. 2 radiator hose and slide the clip to secure it.

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR COOLANT LEAK

   Click here