TURBOCHARGER REMOVAL

CAUTION / NOTICE / HINT

Note

Before removing the turbocharger sub-assembly, be sure to read Maintenance Precaution.

Click here

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (TWC: Front Catalyst)

    Click here

  3. DISCONNECT INLET TURBO OIL PIPE SUB-ASSEMBLY


    1. A01M2GX

      Remove the 4 bolts and union bolt and disconnect the inlet turbo oil pipe sub-assembly.

    2. A01LWDY

      Remove the inlet turbo oil gasket from the inlet turbo oil pipe sub-assembly.

    3. A01LVDE

      Remove the outlet No. 1 turbo oil gasket from the stiffening crankcase assembly.

    4. Remove the gasket from the inlet turbo oil pipe sub-assembly.

  4. DISCONNECT NO. 1 TURBO WATER PIPE SUB-ASSEMBLY


    1. A01LX59

      Remove the bolt, 2 nuts and No. 1 turbo water pipe sub-assembly from the turbocharger sub-assembly.

    2. Remove the water by-pass gasket from the No. 1 turbo water pipe sub-assembly.

  5. REMOVE TURBOCHARGER SUB-ASSEMBLY


    1. A01M275

      Disconnect the intake air control valve (air by-pass valve assembly) connector.

    2. A01M2MF

      Remove the 3 bolts and turbocharger sub-assembly from the cylinder head sub-assembly.

    3. A01LYKX

      Remove the outlet compressor gasket from the turbocharger sub-assembly.

  6. REMOVE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A01LV0SC04
      *1 Stud Bolt (A)
      *2 Stud Bolt (B)

      Using an E10 "TORX" socket wrench, remove the 4 stud bolts (A) from the turbocharger sub-assembly.

    2. Using an E6 "TORX" socket wrench, remove the 2 stud bolts (B) from the turbocharger sub-assembly.