EXHAUST PIPE REMOVAL

CAUTION / NOTICE / HINT

Note

When removing or installing the center exhaust pipe assembly, do not subject the temperature switch to impacts.

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER (w/ Exhaust Heat Recirculation System)


  2. DRAIN ENGINE COOLANT (w/ Exhaust Heat Recirculation System)

    Click here

  3. REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Hatchback)


    1. A01T8N2

      Remove the 2 bolts.

    2. Remove the tail exhaust pipe assembly from the exhaust pipe support.

    3. Remove the gasket from the center exhaust pipe assembly (for Rear Side).

  4. REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Sedan)


    1. A01T8WX

      Remove the 2 bolts.

    2. Remove the tail exhaust pipe assembly from the exhaust pipe support.

    3. Remove the gasket from the center exhaust pipe assembly (for Rear Side).

  5. REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Wagon)


    1. A01T8NY

      Remove the 2 bolts.

    2. Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly (for Rear Side).

  6. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for Rear Side)


    1. A01TCWZ

      Remove the 2 bolts and 2 compression springs.

    2. Remove the center exhaust pipe assembly (for Rear Side) from the exhaust pipe support.

    3. Remove the gasket from the center exhaust pipe assembly (for Front Side).

  7. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for Front Side)


    1. w/o Exhaust Heat Recirculation System:


      1. A01TADL

        Remove the 2 bolts.

      2. Remove the center exhaust pipe assembly (for Front Side) from the 2 exhaust pipe supports.

      3. Remove the gasket from the front exhaust pipe assembly (TWC: Rear Catalyst).

    2. w/ Exhaust Heat Recirculation System:


      1. A01T92Y

        Slide the 2 clips and disconnect the 2 water hoses.

      2. A01TC8C

        Remove the 2 bolts.

      3. Remove the center exhaust pipe assembly (for Front Side) from the 2 exhaust pipe supports.

        Note


        • Do not hold the water inlet pipe and outlet pipe.

        • When removing or installing the center exhaust pipe assembly, do not subject the temperature switch to impacts.

      4. Remove the gasket from the front exhaust pipe assembly (TWC: Rear Catalyst).

  8. REMOVE HEATED OXYGEN SENSOR

    Click here

  9. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)


    1. A01TD4N

      Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly (TWC: Rear Catalyst).

    2. Remove the gasket from the exhaust manifold converter sub-assembly (TWC: Front Catalyst).