INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE INTAKE MANIFOLD


    1. A012KQ3

      Disengage the 4 wire harness clamps.

    2. Remove the bolt and wire harness clamp bracket.

    3. A012M9H

      Remove the engine cover joint and disconnect the wire harness clamp bracket.

    4. Disengage the wire harness clamp.

    5. A012GYX

      Disconnect the No. 1 fuel vapor feed hose from the intake manifold.

    6. A012F3E

      Slide the clip and disconnect the No. 1 vacuum transmitting hose from the intake manifold.

    7. A012JN8

      Slide the clip and disconnect the No. 1 ventilation hose from the intake manifold.

    8. A012LKX

      Remove the 4 bolts, 2 nuts, intake manifold and intake manifold stay.

    9. A012IVG

      Remove the No. 1 intake manifold to head gasket from the intake manifold.

    10. A012FUS

      Remove the engine cover joint from the intake manifold.

  3. REMOVE STUD BOLT (w/ Stud Bolt)

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A012M53

      Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.