PCV VALVE INSTALLATION

PROCEDURE


  1. INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)


    1. A01TAWYC06
      *a Adhesive

      Apply adhesive to 2 or 3 threads of the PCV valve (ventilation valve sub-assembly).

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    2. Using a 22 mm ball joint lock nut wrench, install the PCV valve (ventilation valve sub-assembly).

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note


      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench.

        Click here


      • Do not start the engine for at least 1 hour after installation.

  2. CONNECT VENTILATION HOSE


    1. Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.

  3. INSTALL INTAKE MANIFOLD

    Click here