RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT GLOW PLUG RELAY ASSEMBLY


    1. A00YAX9E02

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 4 Battery voltage not applied 10 kΩ or higher
        Battery voltage applied to terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the glow plug relay assembly.

  2. INSTALL STARTER RELAY ASSEMBLY


    1. A00Y7RK

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Battery voltage not applied 10 kΩ or higher
        Battery voltage applied to terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the starter relay assembly.