GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

   
   

   1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL GLOW PLUG CONTROLLER

   
   

   1. Connect the 4 glow plug controller connectors.

   2. Install the glow plug controller with the 2 bolts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

3. INSTALL FRONT BUMPER ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here