GLOW PLUG CONTROLLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  4. REMOVE GLOW PLUG CONTROLLER


    1. A012JPA

      Disconnect the 4 glow plug controller connectors.

    2. A012K0L

      Remove the 2 bolts and glow plug controller.

  5. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. A012L0R

      Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.