OIL PUMP COMPONENTS
ILLUSTRATION
| *A | Type A | *B | Type B |
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | FUEL INJECTOR ASSEMBLY |
| *3 | FUEL TUBE SUB-ASSEMBLY | *4 | THERMOSTAT |
| *5 | VACUUM SURGE TANK | *6 | WATER INLET |
| *7 | GASKET | *8 | NO. 1 DELIVERY PIPE SPACER |
| *9 | O-RING | *10 | INJECTOR VIBRATION INSULATOR |
| *11 | NO. 2 FUEL PIPE CLAMP | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | Type A | *B | Type B |
| *1 | EXHAUST MANIFOLD | *2 | IGNITION COIL ASSEMBLY |
| *3 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR | *4 | GASKET |
| *5 | MANIFOLD STAY | *6 | DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY |
| *a | Diameter 18 mm (0.709 in.) | *b | Diameter 17 mm (0.669 in.) |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | ENGINE OIL LEVEL DIPSTICK GUIDE | *2 | INTAKE MANIFOLD |
| *3 | NO. 1 WATER BY-PASS PIPE | *4 | NO. 3 WATER BY-PASS HOSE |
| *5 | VENTILATION HOSE | *6 | WATER BY-PASS HOSE |
| *7 | WATER INLET HOSE | *8 | ENGINE OIL LEVEL DIPSTICK |
| *9 | AIR TUBE | *10 | NO. 1 INTAKE MANIFOLD TO HEAD GASKET |
| *11 | INTAKE MANIFOLD STAY | *12 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER GASKET | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *3 | SEAL WASHER | *4 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CRANKSHAFT PULLEY | *2 | NO. 1 CHAIN TENSIONER ASSEMBLY |
| *3 | TIMING CHAIN COVER OIL SEAL | *4 | TIMING CHAIN COVER SUB-ASSEMBLY |
| *5 | ENGINE MOUNTING BRACKET RH | *6 | BRACKET |
| *7 | OIL FILTER BRACKET | *8 | SEAL WASHER |
| *9 | WATER PUMP ASSEMBLY | *10 | O-RING |
| *11 | GASKET | *12 | STUD BOLT |
| *13 | BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP Grease | ★ | Precoated part |
 |
Do not apply lubricants (to the threaded parts) | - | - |
ILLUSTRATION
| *1 | CHAIN SUB-ASSEMBLY | *2 | CHAIN TENSIONER SLIPPER |
| *3 | CRANKSHAFT TIMING SPROCKET | *4 | NO. 1 CHAIN VIBRATION DAMPER |
| *5 | NO. 2 CHAIN SUB-ASSEMBLY | *6 | NO. 2 CHAIN VIBRATION DAMPER |
| *7 | OIL PUMP DRIVE GEAR | *8 | OIL PUMP DRIVESHAFT GEAR |
| *9 | CHAIN TENSIONER PLATE | *10 | SPRING |
| *11 | O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | NO. 2 OIL PAN SUB-ASSEMBLY | *2 | OIL PUMP ASSEMBLY |
| *3 | OIL PAN DRAIN PLUG | *4 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | OIL PUMP COVER SUB-ASSEMBLY | *2 | OIL PUMP RELIEF VALVE |
| *3 | OIL PUMP BODY | *4 | OIL PUMP DRIVEN ROTOR |
| *5 | OIL PUMP DRIVE ROTOR | *6 | OIL PUMP RELIEF VALVE SPRING |
| *7 | OIL PUMP RELIEF VALVE PLUG | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |