OIL PRESSURE SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch assembly connector.

    2. Start the engine.

    3. A00Y7O1

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      1 - Switch body Engine stopped Below 1 Ω

      If the result is not as specified, replace the engine oil pressure switch assembly.

    4. Connect the engine oil pressure switch assembly connector.