ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH


    1. Put protective tape around the center roof drip side finish moulding.

    2. Using a moulding remover, detach the 2 clips and remove the roof drip side finish moulding.

      Note

      When removing the roof drip side finish moulding, be careful not to damage the clips.

      A002P6QE01
      Text in Illustration
      *1 Protective Tape - -