REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 FLOOR UNDER COVER


    1. A002Q68

      Remove the 5 clips and No. 1 floor under cover.

  2. REMOVE REAR BUMPER COVER


    1. A002OVZ

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    2. Put protective tape around the rear bumper cover.

    3. Remove the 5 clips and 2 bolts.

      A002PLIE02
      Text in Illustration
      *1 Protective Tape - -

    4. Detach the 10 claws.

    5. w/ TOYOTA Parking Assist-sensor System:

      Disconnect the No. 4 floor wire connector.

    6. Remove the rear bumper cover.

      A002NVXE02
      Text in Illustration
      *1 Protective Tape - -

  3. REMOVE NO. 1 REAR BUMPER REINFORCEMENT

    A002NTT

    1. Remove the 8 bolts and rear bumper reinforcement.

  4. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH

    A002P7Y

    1. Remove the 3 bolts and rear bumper arm.

  5. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR BUMPER SIDE RETAINER LH

    A002MQ4E01
    Text in Illustration
    *1 Protective Tape

    1. Remove the 2 screws.

    2. Using a clip remover, detach the 3 claws and remove the rear bumper side retainer.

      Note

      Tape the clip remover tip before use.

  7. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR UPPER BUMPER RETAINER LH

    A002P30E04
    Text in Illustration
    *1 Protective Tape

    1. Remove the screw.

    2. Using a clip remover, detach the 2 claws and remove the rear upper bumper retainer.

      Note

      Tape the clip remover tip before use.

  9. REMOVE REAR UPPER BUMPER RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR BUMPER SIDE SEAL LH

    A002P7C

    1. Remove the grommet, nut and 3 clips.

    2. Remove the rear bumper side seal.

  11. REMOVE REAR BUMPER SIDE SEAL RH

    A002O36

    1. Remove the grommet, nut and 2 clips.

    2. Remove the rear bumper side seal.